LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> Blower Motor Speed Control >> Removal and Installation

Removal and Installation

  1. Detach the RH scuff plate trim panel from the RH lower A-pillar trim panel.
  2. Remove the RH lower A-pillar trim panel.
  3. Remove the 2 RH lower instrument panel insulator pin-type retainers and the RH lower instrument panel insulator.
  4. Disconnect the blower motor speed control electrical connector.
  5. Remove the 2 blower motor speed control screws.
  6. Remove the blower motor speed control.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals