LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> Air Inlet Duct >> Removal and Installation

Removal and Installation

  1. Remove the heater core and evaporator core housing. For additional information, refer to HEATER CORE AND EVAPORATOR CORE HOUSING .
  2. Remove the 5 air inlet duct screws.
  3. Remove the air inlet duct.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals