LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 960 (Transfer Case - Power Transfer Unit (PTU)) >> In-Vehicle Servicing >> Transfer Case Vent >> Removal

Transfer Case Vent: Removal

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure applies to vehicles equipped with manual transaxles.
  1. Remove the power transfer unit (PTU). For additional information, refer to Power Transfer Unit (PTU) - Manual Transaxle .
  2. Using a slide hammer with a 3-jaw puller attachment, remove the PTU tube.
scientia non olet · About LEMON Manuals