LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Engine Controls - Powertrain DTC Charts And Descriptions - (Hybrid)) >> DTC Diagnosis >> P2270 - O2 Sensor Signal Stuck Lean - Bank 1, Sensor 2

P2270 - O2 Sensor Signal Stuck Lean - Bank 1, Sensor 2

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P2270 - O2 SENSOR SIGNAL STUCK LEAN - BANK 1, SENSOR 2

Description:  The downstream heated oxygen sensor (HO2S) is forced rich and lean and monitored by the powertrain control module (PCM). The test fails if the PCM does not detect the output of the HO2S in a calibrated amount of time.
Possible Causes: 
  • Pinched, shorted, and corroded wiring and pins
  • Crossed sensor wires
  • Exhaust leaks
  • Contaminated or damaged sensor
Diagnostic Aids:   
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST H .