LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 944 (Manual Transaxle/Transmission And Clutch - General Information) >> General Procedures >> Flywheel Runout Check

Flywheel Runout Check

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000025
 Dial Indicator Gauge with Holding Fixture 100-D002 (D78P-4201-B) or equivalent
  1. Mount the special tool so that the indicator contact point rides on the clutch disc contact surface.
    2. Fig 1: Rotating Flywheel & Measuring Runout
    GF0001001Courtesy of FORD MOTOR CO.
  2. Turn the flywheel. If the runout exceeds the maximum allowance, install a new flywheel.
scientia non olet · About LEMON Manuals