Clutch Pressure Plate Check

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Check the clutch pressure plate surface for scoring, cracks or discoloration. Minor scratches or discoloration should be removed with a fine emery cloth.

Fig 1: Measuring Flatness Of Clutch Pressure Plate Surface With Straightedge

Courtesy of FORD MOTOR CO.

Measure the flatness of the clutch pressure plate surface with a straightedge and a feeler gauge.
- If the measurement exceeds the maximum allowance, install a new clutch pressure plate.

Fig 2: Identifying Clutch Pressure Plate

Courtesy of FORD MOTOR CO.

Check the diaphragm spring fingers for discoloration, scoring, bent or broken segments and spring ends that are higher or lower than the rest.

Fig 3: Measuring Wear Of Diaphragm Spring Fingers

Courtesy of FORD MOTOR CO.

Measure the wear of the diaphragm spring fingers.