LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 943 (Automatic Transmission Cooling) >> Removal And Installation >> Transmission Fluid Cooler Tubes - 3.0L >> Removal

Transmission Fluid Cooler Tubes - 3.0L: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Disconnect the transmission fluid cooler lower inlet and outlet tubes from the radiator.
  3. Disconnect the auxiliary transmission fluid cooler hoses from the transmission fluid cooler inlet and lower inlet tubes, and remove the lower inlet tube.
  4. Disconnect the transmission fluid cooler inlet and outlet tubes from the transmission.
  5. Remove the transmission fluid cooler tube bracket and the transmission fluid cooler inlet and outlet tubes from the engine.
scientia non olet · About LEMON Manuals