Auxiliary Transmission Fluid Cooler - 3.0L, 4.0L: Removal
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
- Remove the grille.
- Remove the upper transmission fluid cooler screw.
- Remove the transmission fluid cooler hose clamps and the transmission fluid cooler hoses.
- Remove the 2 lower transmission fluid cooler screws and remove the cooler.