Auxiliary Transmission Fluid Cooler - 3.0L, 4.0L: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Transmission Fluid Cooler Lower Mounting Screws

Courtesy of FORD MOTOR CO.

Position the transmission fluid cooler in the vehicle and install the lower screws.
- Tighten to 8 Nm (71 lb-in).

Fig 2: Locating Transmission Fluid Cooler Hose & Clamps

Courtesy of FORD MOTOR CO.

Install the transmission fluid cooler hoses and clamps.

Fig 3: Locating Transmission Fluid Cooler Upper Mounting Screw

Courtesy of FORD MOTOR CO.

Install the upper transmission fluid cooler screw.

Fig 4: Locating Grille

Courtesy of FORD MOTOR CO.

Install the grille.
Fill the transmission with clean automatic transmission fluid to the correct level and check for correct transmission operation.