Pinpoint Test B: DTC B1359 - No Power In Acc
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multi-meter probes.
- B1 CHECK THE WIPERS AND THE RADIO FOR NORMAL OPERATION WITH THE IGNITION SWITCH IN THE RUN POSITION
- Key in ON position.
- With ignition switch in the RUN position, check the wipers and the radio for normal operation.
- Do the wipers and the radio operate correctly in the RUN position?
- YES : INSTALL a new ignition switch. REFER to Ignition Switch . TEST the system for normal operation.
- NO : Go to Pinpoint Test C .