LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 925 (Instrument Cluster System) >> Diagnostic Tests >> Instrument Cluster (IC) >> Pinpoint Tests >> Pinpoint Test AB: DTC B1363 - Ignition Start Circuit Fault >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

DTC B1363 sets when the instrument cluster senses voltage applied to the run/start circuit CBP10 (YE/OG) for more than 15 seconds.

Possible Causes

scientia non olet · About LEMON Manuals