Normal Operation
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
With the ignition switch in the START or RUN position, the instrument cluster receives voltage from the smart junction box (SJB) through circuits CBP10 (YE/OG), and CBP09 (VT/GY). With the ignition switch in the OFF position, the instrument cluster receives its keep-alive voltage from the SJB through circuit SCP33 (RD). The instrument cluster is grounded through circuits GD174 (BK/WH) and GD161 (BK/YE).
Possible Causes
- Fuse(s)
- Circuit CBP09 (VT/GY) open
- Circuit CBP10 (YE/OG) open
- Circuit GD161 (BK/YE) open
- Circuit GD174 (BK/WH) open
- Circuit SBP33 (RD) open
- Instrument cluster