LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 918 (Instrument Panel And Console) >> Removal And Installation >> Instrument Cluster Center Finish Panel

Instrument Cluster Center Finish Panel

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Instrument Cluster Center Finish Panel
GF0008663Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W705314 Instrument cluster center finish panel screw (2 required)
2 04302 Instrument cluster center finish panel
3 1004371 Instrument cluster center finish panel opening cover
  1. Remove the radio. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS article.
  2. Remove the 2 center finish panel screws.
    Fig 2: Locating Center Finish Panel Screws
    GF0008664Courtesy of FORD MOTOR CO.
  3. Remove the center finish panel from the retainers and disconnect the electrical connectors.
    Fig 3: Locating Retainers & Electrical Connectors
    GF0008665Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals