Seat Track - 60 Percent: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Install the seat track rails to the seat track and install the 8 nuts.
- Tighten to 25 Nm (18 lb-ft).
Install the seat track and 4 seat track-to-cushion frame bolts.
- Tighten to 6 Nm (53 lb-in).
Install the seat track adjustment handle.

Fig 1: Locating Seat Track Adjustment Lever
Courtesy of FORD MOTOR CO.
- Install one side of the seat track adjustment handle at a time.
Install the seat track assist spring.

Fig 2: Locating Seat Track Spring
Courtesy of FORD MOTOR CO.
Install the 60 percent seat backrest assembly. For additional information, refer to Seat Backrest - Front, 60 Percent in this article.
Install the 60 percent seat armrest. For additional information, refer to Seat Armrest - 60 Percent in this article.
Install the seat. For additional information, refer to Seat - Front in this article.