LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Seat System) >> Removal And Installation >> Seat Cushion Cover - Front >> Removal >> Passenger seat

Passenger seat

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Note position of wire routing for installation.
    Fig 1: Locating Seat Wiring Harness Retainer Clip & Seat Wiring Harness Connector
    GF0008552Courtesy of FORD MOTOR CO.
  1. Release the seat wiring harness retainer clip and detach the seat wiring harness connector from the seat cushion frame.
scientia non olet · About LEMON Manuals