Seats with manual lumbar

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The lumbar support assembly must be fully relaxed.

Relax the lumbar support assembly and remove the lumbar knob.
Remove the 2 screws and lumbar support adjuster.

NOTE: Note the routing of the lumbar cable.

Fig 1: Locating Adjuster Cable

Courtesy of FORD MOTOR CO.

Disconnect the lumbar support adjuster.
- To separate the lumbar support adjuster from the lumbar adjustment cable, align the lumbar adjustment cable ball socket in the lumbar support adjuster keyway and bend the parts 90 degrees to each other.