LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Seat System) >> Removal And Installation >> Seat Backrest - Front, Bucket and 40 Percent >> Installation >> Seats with manual lumbar

Seats with manual lumbar

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Route the lumbar adjustment cable as noted during removal.
  2. Connect the lumbar support adjuster and the lumbar adjustment cable.
    Fig 1: Locating Adjuster Cable
    GF0001891Courtesy of FORD MOTOR CO.
  3. Install the lumbar support adjuster and the 2 screws.
  4. Install the lumbar knob.
scientia non olet · About LEMON Manuals