LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Seat System) >> Removal And Installation >> Seat - Front >> Removal >> 60 percent seat

60 percent seat

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front center safety belt bolt.
    Fig 1: Locating Center Safety Belt Buckle Anchor Bolt
    GF0008520Courtesy of FORD MOTOR CO.
    • If equipped, release and pull the front center safety belt bolt cover upward on the front center safety belt.


    NOTE: The SuperCab and regular cab safety belts route differently. Note belt position for correct installation.
    Fig 1: Routing Center Safety Belt Buckle
    GF0008521Courtesy of FORD MOTOR CO.
  1. Route the front center safety belt buckle through the locating strap on the side of the seat.