LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 911 (Seat System) >> Disassembly And Assembly >> Seat Backrest - Front, Bucket and 40 Percent >> Disassembly >> Seats with manual lumbar

Seats with manual lumbar

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lumbar support assembly.
    • Remove and discard the tie strap.
    • Flex the lumbar support.
    • Unhook the lumbar support adjusting cable.
    • Unhook and remove the lumbar support adjusting cable.
    • Detach the lumbar support from the guide wires. Remove the lumbar support.
      Fig 1: Locating Strap, Support, Adjusting Cable And Guide Wires
      GF0008566Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals