LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 910 (Interior Trim And Ornamentation) >> Removal And Installation >> A-Pillar Trim Panel

A-Pillar Trim Panel

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A-pillar trim panel assist handle bolt covers, if equipped.
    Fig 1: Locating A-Pillar Trim Panel Assist Handle Bolt Covers
    GF0008468Courtesy of FORD MOTOR CO.
  2. Remove the A-pillar trim panel assist handles, if equipped.
    Fig 2: Locating Trim Panel Handles Bolt
    GF0008469Courtesy of FORD MOTOR CO.
    • Remove the bolts.
    • Remove the handles.
  3. Remove the A-pillar trim panel.
    Fig 3: Locating A-Pillar Trim Panel
    GF0008470Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.