LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 909 (Exterior Lighting System) >> Diagnostic Tests >> Reversing Lamps >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect the following for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Digital transmission range (TR) sensor (automatic transmission)
    • Reversing lamp switch (manual transmission)
    • Smart junction box (SJB) fuse 20 (10A) (reversing lamps)
    • SJB
    • Circuitry
    • Bulb(s)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom. Go to Symptom Chart .