LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 908 (Bumper System) >> Removal And Installation >> Bumper - Rear, Beam >> Painted bumpers only

Painted bumpers only

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 bolts and nuts from the rear bumper beam-to-outer bumper bracket.
    • To install, tighten to 40 N.m (30 lb-ft).
scientia non olet · About LEMON Manuals