Fuel Pump: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fuel tank. For additional information, refer to Fuel Tank in this article.
Clean the area around the fuel pump mounting flange.
Using the special tool, remove the fuel tank pump assembly locking retainer ring.

Fig 1: Removing Fuel Tank Pump Assembly Locking Retainer Ring Using Special Tool (310-123)
Courtesy of FORD MOTOR CO.

CAUTION: The fuel pump assembly must be removed and handled carefully to avoid damage to the float arm and filter.

Remove the fuel pump assembly.
Remove and discard the fuel pump O-ring seal.