Fuel Pump: Installation
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the fuel pump mounting flange and the fuel tank mounting surface.
- Install a new fuel pump O-ring seal.
- Install the fuel pump and sender assembly with the float toward the rear of the tank. Align the arrows molded into the tank and flange.
- Install the locking ring while compressing the pump assembly into the tank.
- Using the special tool, tighten the fuel pump assembly locking ring retainer ring until it locks in place.
- Install the fuel tank. For additional information, refer to Fuel Tank in this article.