Inspection and Verification
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern by operating the transmission external control.
- Visually inspect for obvious signs of mechanical and electrical damage; refer to the following chart:VISUAL INSPECTION CHART
Mechanical Electrical - Damaged shift interlock actuator
- Damaged transmission control (TC) switch
- Failed fuse(s)
- F20 (10A)
- F32 (5A)
- Damaged wiring harness
- Loose or corroded connections
- If the concern is not visually evident, determine the symptom. Go to Symptom Chart .