Disassembly And Assembly Of Sub Assemblies: Synchronizers: Disassembly

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Mark parts for assembly.

Fig 1: Separating Synchronizer Assembly

Courtesy of FORD MOTOR CO.

Disassemble the synchronizer.
- Remove the retaining spring.
- Flip the synchronizer over and remove the opposite retaining spring.
- Remove the 3 insert keys.
- Remove the sleeve.
Inspect all the synchronizer components for wear and damage.