Alignment Specifications
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/Split |
|---|---|---|---|
| Front - Rear Wheel Drive (RWD) | |||
| Camber | -0.5° ± 0.7° | -0.5° ± 0.7° | 0.0° ± 0.7° |
| Caster | 3.5° ± 1.0° | 3.9° ± 1.0° | -0.4° ± 0.7° |
| Toe @ curb ride height (Positive value is toe-in, negative value is toe-out) | - | - | 0.06° ± 0.25° |
| Front - Four Wheel Drive (4WD) | |||
| Camber | -0.5° ± 0.7° | -0.5° ± 0.7° | 0.0° ± 0.7° |
| Caster | 2.8° ± 1.0° | 3.5° ± 1.0° | -0.7° ± 0.7° |
| Toe @ curb ride height (Positive value is toe-in, negative value is toe-out) | - | - | 0.12° ± 0.25° |
| Rear | |||
| Camber | 0.0° ± 0.75° | 0.0° ± 0.75° | 0.0° ± 0.75° |
| Toe @ curb ride height (Positive value is toe-in, negative value is toe-out) | 0.0° ± 0.02° | 0.0° ± 0.02° | 0.0° ± 0.04° |
| Thrust angle | - | - | 0.0° ± 0.3° |