Vehicles with tilt column

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the sensor ring.

Fig 1: Identifying Sensor Ring
Courtesy of FORD MOTOR CO.
- Remove the steering column lower bearing spring.
- Remove the sensor ring.

Remove the 2 lock cylinder housing pivot screws.

Fig 1: Locating Lock Cylinder Housing Pivot Screws
Courtesy of FORD MOTOR CO.

Use a suitable punch to remove the steering column bearing from the steering column lock cylinder housing.

Fig 1: Removing Steering Column Bearing From Steering Column Lock Cylinder Housing Using Suitable Punch
Courtesy of FORD MOTOR CO.