Vehicles with fixed column

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Position the steering column spacer and install the 2 lock cylinder housing screws.

Fig 1: Locating Steering Column Spacer & Lock Cylinder Housing Screws
Courtesy of FORD MOTOR CO.
- To install, tighten to 22 Nm (16 lb-ft).

Install the steering column bearing tolerance ring.

Fig 1: Locating Steering Column Bearing Tolerance Ring
Courtesy of FORD MOTOR CO.