LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Automatic Transmission) >> In-Vehicle Servicing >> Digital Transmission Range (TR) Sensor >> Removal

Digital Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Disconnect the selector lever cable from the manual control lever.
  3. Disconnect the digital transmission range (TR) sensor electrical connector.
  4. Remove the manual control outer lever nut and manual control outer lever.
  5. Remove the screws and the digital TR sensor.
scientia non olet · About LEMON Manuals