SSA, SSB, SSC, SSD and TCC in Bench Mode
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
The Bench Mode allows the technician to carry out electrical circuit checks on the following components:
- SSA - Activates SS#1 OFF or ON.
- SSB - Activates SS#2 OFF or ON.
- SSC - Activates SS#3 OFF or ON.
- SSD - Activates SS#4 OFF or ON.
- TCC - Activates TCC OFF or ON.
OSC "SSA, SSB, SSC, SSD, TCC" Bench Mode operates ONLY when:
- VSS and digital TR sensor are operational.
- No VSS and digital TR sensor DTCs.
- Transmission range selector lever in PARK.
- Key ON.
- Engine OFF.
OSC Command Values
- OFF - turns solenoid OFF.
- ON - turns solenoid ON.
- XXX - cancels OSC value sent.
- SEND - sends the values to PCM.