LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 890 (Exhaust System) >> General Procedures >> Exhaust System Alignment >> Vehicles with 3.0L engine and 4.0L engine

Vehicles with 3.0L engine and 4.0L engine

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the LH side of the exhaust Y-pipe-to-RH side of exhaust Y-pipe nuts
    • Tighten to 40 Nm (30 lb-ft).
  2. Confirm the exhaust isolators are at zero load and hanging without any twist or binding.
scientia non olet · About LEMON Manuals