Vehicles with leaf spring A/C clutch

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A/C clutch disc and hub retaining bolt.
- Hold the A/C clutch disc and hub with the special tool.
  
  Fig 1: Holding A/C Clutch Disc & Hub With Special Tool
  Courtesy of FORD MOTOR CO.
- Remove the bolt.
Remove the A/C clutch disc and hub and the A/C clutch hub spacer.

Fig 2: Identifying A/C Clutch Disc, Hub & Spacer
Courtesy of FORD MOTOR CO.
- Thread an 8 x 1.25 mm bolt into the A/C clutch disc and hub to force it from the compressor shaft.
- Lift the A/C clutch disc and hub and the spacer from the compressor shaft.