3.0L vehicles

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The fan clutch has a left-hand thread and must be rotated clockwise for removal.

Fig 1: Identifying Special Tool Used With 7/8-in Wrench

Courtesy of FORD MOTOR CO.

Using the special tool and a standard 7/8-in wrench, remove the fan and fan clutch assembly and position it into the shroud.
- To install, tighten to 54 Nm (40 lb-ft).