Ball Joint - Lower: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not damage the lower ball joint boot when installing the special tool.

NOTE: Clean and inspect the lower arm ball joint bore for damage before installing a new ball joint.

NOTE: Make sure the new lower ball joint snap ring is fully seated.

Fig 1: Installing Lower Ball Joint Using Special Tools

Courtesy of FORD MOTOR CO.

Using the special tools, install the lower ball joint.
Install the wheel spindle. For additional information, refer to Wheel Spindle in this article.