Power Steering Pump Pulley - 2.3L: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Using the special tool, install the power steering pump pulley.

Fig 1: Installing Power Steering Pump Pulley Using Special Tool
Courtesy of FORD MOTOR CO.

NOTE: For additional information on accessory drive belt routing, refer to ACCESSORY DRIVE article.

Fig 2: Locating Power Steering Pump Pulley

Courtesy of FORD MOTOR CO.

Rotate the tensioner counterclockwise and position the belt on the power steering pump pulley.
Install the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.