Transfer Case Rear Output Shaft Seal: Notes
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Holding Fixture, Drive Pinion Flange | 205-126 (T78P-4851-A) | |
| Installer, Drive Pinion Oil Seal | 205-304 (T90T-4676-A) | |
| Installer, Transmission Output Shaft Flange | 205-495 | |
| Remover, Oil Seal | 303-409 (T92C-6700-CH) |
Material
| Item | Specification |
|---|---|
| Threadlock 262 TA-26 |
WSK-M2G351-A6 |