Neutral Tow

The neutral tow feature is a program embedded in the 4X4 control module, which must be activated by a dealer technician. The neutral tow feature disengages the wheels from the powertrain by shifting the transfer case to the NEUTRAL position. This allows the vehicle to be towed with all 4 wheels on the ground. To activate the neutral tow feature, the dealer technician must access the 4X4 control module through the scan tool and data link connector. Once communication is achieved, the technician can request the neutral tow feature be enabled. The technician must also install the neutral tow indicator lamp in order for the feature to be activated.

Feature inputs:

• MSS
• Contact plate position inputs A, B, C, D
• Vehicle speed signal (VSS)
• Door ajar switch (battery voltage when door is closed, grounded circuit otherwise)
• Digital TR sensor

Feature outputs:

• 4WD shift motor outputs
• Neutral tow indicator lamp