LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Engine - 4.0L (SOHC)) >> In-Vehicle Servicing >> Valve Seals >> Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the valve seals with clean engine oil.
    Fig 1: Using Special Tool To Install Valve Seal
    GF0009351Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the valve seal.
  2. Install the valve springs. For additional information, refer to Valve Springs  in this article.
scientia non olet · About LEMON Manuals