LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Engine - 4.0L (SOHC)) >> In-Vehicle Servicing >> Oil Pump Screen and Pickup Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan  in this article.
  2. Remove the bolt and the oil pump screen and pickup tube.
    • To install, tighten to 10 N.m (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals