LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Engine - 4.0L (SOHC)) >> In-Vehicle Servicing >> Exhaust Manifold - LH >> Removal

Exhaust Manifold - LH: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Detach the differential feedback pressure EGR sensor from the exhaust manifold-to-EGR valve tube.
  3. Remove the exhaust manifold-to-EGR valve tube.
  4. Remove the exhaust manifold-to-dual converter Y-pipe nuts.
  5. Remove the 6 nuts, the LH exhaust manifold and the gasket.
    • Discard the nuts and the gasket.
  6. Remove and discard the 6 LH exhaust manifold studs.
scientia non olet · About LEMON Manuals