LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Engine - 4.0L (SOHC)) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley  in this article.
  2. Using the special tool, remove and discard the crankshaft front seal.
    Fig 1: Locating Special Tool And Crankshaft Front Oil Seal
    GF0009316Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals