LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 875 (Engine - 4.0L (SOHC)) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the new front seal with clean engine oil.
    Fig 1: Installing Crankshaft Front Seal Using Special Tool
    GF0009317Courtesy of FORD MOTOR CO.
  1. Using the special tools, install a new crankshaft front seal.
  2. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley  in this article.
scientia non olet · About LEMON Manuals