Section 874 (Engine - 3.0L (2V)): Specifications: Camshaft
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT
| Item | Specification |
|---|---|
| Lobe Lift | |
| Intake | 6.408 mm (0.260 in) |
| Exhaust | 6.604 mm (0.260 in) |
| Allowable Lobe Lift Loss | 0.127 mm (0.005 in) |
| Theoretical Valve Lift @ Zero Lash | |
| Intake | 10.32 mm (0.419 in) |
| Exhaust | 10.65 mm (0.419 in) |
| End Play | |
| Service Limit | 0.003 mm (0.007 in) |
| Journal to Bearing Clearance | 0.025-0.076 mm (0.001-0.003 in) |
| Journal Diameter | |
| All | 50.987-51.013 mm (2.0074-2.0084 in) |
| Cam Bearing I.D. | 51.038-51.063 mm (2.0094-2.0104 in) |
| Runout Limit Runout of No. 2 or No. 3 Relative to No. 1 and No. 4 |
0.05 mm (0.002 in) |
| Out-of-Round Limit | 0.025 mm (0.001 in) |