LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (2V)) >> In-Vehicle Servicing >> Timing Chain >> Removal

Timing Chain: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine front cover. For additional information, refer to Engine Front Cover  in this article.
  2. Rotate the crankshaft and align the timing marks.
    Fig 1: Locating Timing Marks On Crankshaft
    GF0009132Courtesy of FORD MOTOR CO.
  3. Remove the bolt.
    Fig 2: Locating Bolt On Crankshaft
    GF0009133Courtesy of FORD MOTOR CO.
  4. Remove the timing chain, the camshaft sprocket and the crankshaft sprocket as an assembly.
    Fig 3: Locating Timing Chain & Camshaft Sprocket
    GF0009134Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals