Timing Chain: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Align the timing marks.

Fig 1: Aligning Timing Marks
Courtesy of FORD MOTOR CO.
Install the timing chain, the camshaft sprocket and the crankshaft sprocket as an assembly.

Fig 2: Locating Timing Chain & Camshaft Sprocket
Courtesy of FORD MOTOR CO.
Install the bolt.

Fig 3: Locating Bolt On Crankshaft
Courtesy of FORD MOTOR CO.
- Tighten to 63 Nm (46 lb-ft).
Install the engine front cover. For additional information, refer to Engine Front Cover in this article.