LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (2V)) >> In-Vehicle Servicing >> Oil Level Indicator and Tube >> Installation

Oil Level Indicator and Tube: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The end of the oil level indicator tube should be cleaned with metal surface prep before application of the sealant.
    Fig 1: Locating Oil Level Indicator Tube
    GF0009139Courtesy of FORD MOTOR CO.
  1. Coat the sealing surfaces of the oil level indicator tube with silicone gasket and sealant.
  2. Install the oil level indicator tube assembly and nut.
    • Tighten to 18 Nm (13 lb-ft).
scientia non olet · About LEMON Manuals