LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (2V)) >> In-Vehicle Servicing >> Flywheel >> Installation

In-Vehicle Servicing: Flywheel: Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flywheel.
    • Install the 6 bolts. Tighten the bolts in a criss-cross pattern.
    • Tighten to 80 Nm (59 lb-ft).
  2. Install the clutch. For additional information, refer to CLUTCH article.
scientia non olet · About LEMON Manuals