Exhaust Manifold - RH: Removal
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Remove the exhaust flange nuts.
- Remove the bolts, stud bolts, exhaust manifold and gasket.
- Discard the bolts, stud bolts and exhaust manifold gasket.
- Clean and inspect the exhaust manifold. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION article.