Vehicles with manual transmission

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the HO2S electrical connector.

Fig 1: Locating HO2S Electrical Connector
Courtesy of FORD MOTOR CO.
Disconnect the catalyst monitor sensor electrical connector. Remove the nut and route the wiring harness over the transmission.

Fig 2: Locating Catalyst Monitor Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Disconnect the transmission electrical connectors and detach the wiring harness retainers.

Fig 3: Locating Transmission Electrical Connectors
Courtesy of FORD MOTOR CO.